Ships in 1 business day.
Solar Panel USE-2 Cable, RHH/RHW-2 Single-Insulated 10 AWG, 7-Strand, 600 Volt Copper, VW-1, CT Rated with MC4 Connectors. Cable is Made in the U.S.A.
Single copper conductor, stranded, insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation. Temperature rating 90°C in wet and dry applications. All sizes pass the vertical flame test (VW-1).
Types USE-2, RHH/RHW-2 VW-1 are suitable for use in general purpose wiring applications and may be installed in raceway, conduit, direct burial and aerial installations where a cable having superior flame retardance is required. Also suitable for use in low leakage circuits requiring a dielectric constant of 3.5 or less (Hospital Grade).
- ASTM B3, B8 and B787
- UL 44 and UL 854, ICEA S-95-658/NEMA WC-70
- Federal spec. A-A-59544
- For CT use / IEEE 1202/FT4 1/0 AWG and larger
- Gasoline and Oil Resistant II
- -40°C rated
- UL Direct Burial
- C(UL) US RW90 1kV:CSA/UL Listed
- C(UL) RPV90 600V
- Suitable for use in 105°C Dry System
- RoHS Compliant
MC4 Extension Cables have newer, snap-together multi-contact hard plastic connectors on each end. You can use these output cables between PV arrays with multi-contact cable outputs and junction boxes or grid-tie inverters.
The new Solarline 2 cables have a male connector on one end and a female connector on the other end. You can use them to extend module output cables or you can cut anywhere along the wire to obtain the needed length of male and female cable to run from the ends of a module string to a combiner box or to an inverter. For example, if you need a 30’ male and a 20’ female, order a 50’ cable.
- Snap-in locking
- Proven MC-Multilam technology with high long-term stability
- Tried and tested plug connectors
MC4 Cable Coupler Technical Data
PV Magazine – Weeding Out the Counterfeits